Wheel Hub Assemblies
1,200+ Part Numbers
Gen 2.5 & 3 designs
ABS applications
OE-spec engineering
Quick Navigate to a Product Page
Well built — and proven at every stage.
Each assembly is engineered around its application and verified through the program, from raw material to final inspection.
Bearing & Preload
Bearing geometry, internal clearance, and preload matched to the application and set at the factory.
High-Performance Seal Design
Application-specific seals that keep contamination out and lubrication in.
ABS Integration
ABS encoder/tone-ring and sensor configuration matched to the OE application, where equipped.
Materials & Heat Treatment
Controlled material specifications with heat treatment on load-bearing components.
Precision machining
Controlled dimensions, mounting surfaces, and flange runout for accurate, true-running fit.
Surface Protection
Regular, black-oxide, or e-coating, specified to the market and application.
Checked and tested at every stage
Incoming material
Final testing
Material Verification
Heat treatment & hardness
Hardening process controlled and hardness verified on load-bearing surfaces.
Eddy-current testing
Every hub scanned for surface cracks and heat-treatment consistency.
Dimensional inspection
Critical dimensions, bore, and bolt-circle verified by gauge and CMM.
Flange runout
Mounting-face runout checked for true, vibration-free running.
Bearing preload & rotation
Preload and rotational torque verified to the application.
ABS signal check
Wheel-speed signal tested on every ABS-equipped unit.
Seal & grease
Sealing and lubrication checked for correct fill and leak resistance.
Coating & corrosion
Surface finish inspected and salt-spray tested to specification.
Durability & fatigue
Life and fatigue testing validates the design to program requirements.
Critical checks are performed on every unit; durability and corrosion testing are validated on a sampling basis to program requirements. Backed by IATF 16949 and/or ISO 9001 certified quality systems.
Built to your brand, not a catalog.
Finishes & coatings
Regular, black-oxide, e-coating, or a customer-specified finish for your market.
ABS & configuration
ABS options and application configuration matched to your coverage.
Materials & spec
Material and specification developed around your program requirements.
Brand & packaging
Your brand and packaging — parts arrive ready for your shelf.
Hardware & installation
Application-specific studs, hardware, and installation configuration.
Part numbers & SKU setup
Your part numbering and SKU structure, aligned to your existing program.
Broad coverage — and still growing.
1,200+
Wheel hub assemblies
Passenger + light-duty
Application coverage
Ongoing
New applications added
A small selection of our 1,200+ hub SKUs
1,200+ Part Numbers
1,200+ Part Numbers
1,200+ Part Numbers
1,200+ Part Numbers
1,200+ Part Numbers
Wheel Hub Assemblies
Engineered around the application. Wheel hub assemblies carry the vehicle’s load, keep the wheel running true, and play a critical role in braking and stability. Bosda’s program covers more than 1,200 part numbers for passenger and light-duty vehicles — each developed around its specific application.
Protective Coatings & Surface Treatments
Choose the corrosion protection your market demands
Bosda offers multiple surface finishing options to meet performance, durability, and environmental requirements across different applications.
Regular
Black Oxidized
ECoated
Superior corrosion resistance and durable protection for demanding environments.
Integrated ABS Tone Ring
Our wheel hub assemblies are available with integrated ABS tone rings engineered for accurate wheel-speed signal performance and reliable compatibility with modern braking and stability-control systems. Consistent tooth geometry and a controlled air gap keep the signal clean across the full speed range, so the part installs without throwing dashboard faults or driving returns.
- Consistent tone-ring geometry for a clean signal
- Compatible with modern ABS and stability-control systems
- Validated to reduce sensor-related returns
Factory-set preload
Every hub unit ships with bearing preload set precisely at the factory and sealed in for life. The installer simply bolts it on — no pressing, no manual adjustment, and far fewer install errors, which is a leading cause of premature wheel-bearing failure in the field.
- Preload set and sealed at the factory
- Bolt-on installation, no press required
- Removes the #1 source of install-related failures
Sealed Bearing Design
Our wheel hubs use sealed, pre-lubricated bearing designs that protect the internal components from contamination, moisture, and road debris — the number-one cause of premature bearing failure. Sealed-for-life construction means the bearing arrives ready to run and stays protected through years of service.
- Sealed and pre-lubricated for life
- Protects against water, salt, and debris
- Supports long, quiet service life
Protective Coatings & Surface Treatments
Choose the corrosion protection your market demands
Bosda offers multiple surface finishing options to meet performance, durability, and environmental requirements across different applications:
Regular
Our standard finish provides reliable performance for general applications, delivering consistent quality and corrosion protection under normal operating conditions.
Black Oxidized
Our black oxidized finish enhances surface protection while improving resistance to wear and light corrosion, with the added benefits of a uniform appearance and increased durability.
ECoated
E-coating offers superior corrosion resistance and long-term durability, especially in harsh environments. This advanced coating process ensures even coverage across complex surfaces.
Looking for a Hub for a specific brand/model?
Browse a selection of our 1,200+ hub SKUs by application, or request the full partslist and our team will match coverage to your program.
A small selection of our 1200+ Wheel Hub SKU's
Bosda Part #:515097
Compatible with:
Bosda Part #:515097
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515206
Compatible with:
Bosda Part #:515206
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515162
Compatible with:
Bosda Part #:515162
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:513214
Compatible with:
Bosda Part #:513214
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515058
Compatible with:
Bosda Part #:515058
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:513277
Compatible with:
Bosda Part #:513277
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515136
Compatible with:
Bosda Part #:515136
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515071
Compatible with:
Bosda Part #:515071
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515096
Compatible with:
Bosda Part #:515096
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:513187HD
Compatible with:
Bosda Part #:513187HD
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515097
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515206
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515162
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:513214
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515058
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:513277
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515136
Wheel Hub Assembly
Position: Front
Compatible with:
Bosda Part #:515071
Wheel Hub Assembly
Position: Front
Compatible with:
